With the advent of spring, the continuous light rain has made all provinces and cities in the "time of tide", especially in the southern climate of Huinan, where the walls, glass, and corridors are all sweating. Moisture-proof work for LED displays placed indoors and outdoors is also intense. Improper maintenance and storage of led display screens will cause problems such as dead light, dim light, short circuit, open circuit and damage to the lamp body. Don't be afraid, there are a large collection of existing indoor and outdoor LED display moisture-proof methods, you can take it away.
Metodă rezistentă la umiditate-pentru ecranul LED de interior și exterior
Storage and moisture-proof method of led module:
LED modules need to be dry and ventilated. Use pallets or other objects to elevate them during storage, and do not directly touch the ground. The storage environment is equipped with a temperature and humidity monitor, and the environmental humidity is controlled below 60 percent RH. The LED module is very comfortable. Put clothes on the LED module, and store the unpacked product, repackage it and put in an appropriate desiccant. If the LED module is stored for more than 1 month, the module should be aged for 6 hours before use: the full brightness is set to 10 percent /1H, the full brightness is set to 30 percent /1H, and the full brightness is set to 60 percent /2H, the full brightness is set to 80 percent /1H, and the full brightness is set to 100 percent /1H. After 6 hours of aging, it can be used for the whole screen assembly.
Moisture-proof method for outdoor led display:
Configure a temperature and humidity monitor at the installation site of the outdoor LED display to monitor the humidity around the screen in time; the first rainy day or after heavy rain after the screen is installed, check whether there is moisture, water droplets, moisture, etc. inside the screen in time ; Under the ambient humidity of 10 percent -85 percent RH, the screen should be turned on at least once a day, and the display should work normally for more than 2 hours each time; if the ambient humidity is higher than 90 percent RH or if you encounter the southern sky, respond to the use environment of the screen. Dehumidify, and ensure that the display screen works normally for more than 4 hours a day.
Afișaj cu LED de exterior rezistent la umiditate-
Moisture-proof method for indoor led display screen:
Under the ambient humidity of 10 percent -65 percent RH, the display screen should be turned on at least once a day, and ensure normal work for more than 4 hours each time; if the ambient humidity is higher than 65 percent RH or if you encounter back to the south, respond to the use environment of the screen. Dehumidify, and ensure that the display screen works normally for more than 8 hours a day; the relevant doors and windows should be closed at night to prevent the screen from being damaged by regaining moisture at night.
Moisture-proof method for indoor and outdoor LED rental screens:
After each use, it should be immediately put into the air transfer box for sealed storage; in each air transfer box, there must be a desiccant or moisture-absorbing bag of not less than 50g; and the desiccant or moisture-absorbing bag should be checked for failure regularly. It needs to be replaced every 2 months; under the ambient humidity of 10 percent -65 percent RH, the display screen should be taken out every half month to work (play video) for more than 2H; environmental humidity exceeds 65 percent RH or encounters south wind Today, the display screen should be taken out to light up (play video) for more than 2H every week; during the rental of the screen body, avoid rain or water on the screen body. If it is not very wet, dry the water and use a hair dryer in time Blow dry, and place the screen for 2 hours, then light up and work for 2 hours; it is strictly forbidden to use the indoor rental screen as an outdoor rental screen, especially in the open air environment.
The above are all kinds of indoor and outdoor led display, indoor and outdoor led rental screen moisture-proof methods shared by Bobangcheng LCD display, I hope it will be useful to everyone.
