Recently, there will always be news on the Internet or on TV that there is heavy rain in a certain area, and residents need to go boating. The extreme heavy rain has not only caused a lot of inconvenience to people's travel, but also may cause some LED display manufacturers' warehouses. Water ingress, causing water ingress into the display screen. In view of the uninterrupted occurrence of this phenomenon, what measures should LED display manufacturers take to deal with the ingress of water into the screen? Let's explain how to solve the problem of water ingress in the LED display. method:
LED display
First of all, use a fan or other tools to completely dry the LED display screen body with water at the fastest speed;
Secondly, energize and age the screen after being completely dried. The specific steps are as follows:
(1) Adjust the brightness (full white) to 10 percent , and power on and age for 8-12 hours;
(2) Adjust the brightness (full white) to 30 percent , power on and age for 12 hours;
(3) Adjust the brightness (full white) to 60 percent , power on and age for 12-24 hours;
(4) Adjust the brightness (full white) to 80 percent , power on and age for 12-24 hours;
(5) Adjust the brightness (full white) to , and aging for 8-12 hours after power on.
LED display
After completing the above steps, the LED display screen body will basically return to normal, but there are several precautions in the handling process:
1. When water is found in the warehouse or the LED display screen is flooded, it should be dealt with urgently and do not delay;
2. Organize personnel to blow-dry the LED display screen that enters the water;
3. Do not put the LED display screen that has been flooded into the air box, it is easy to make the LED light boring;
4. When water enters the warehouse, the air box may enter water. All air boxes should be exposed to the sun to prevent moisture from volatilizing into the LED display screen after the box is installed;
5. Failure to handle all flooded LED displays in time may affect the stability of the screen to a greater or lesser degree. During emergency treatment, the screen may die continuously after the screen is powered on, which requires the manufacturer Pay attention to observation at any time;
6. All flooded LED display screens are in the air box. After more than 72 hours, the screen body is basically of no repair value, and it needs to be handled with caution.
In summary, when dealing with the water ingress of the display screen, what is needed is the word "as soon as possible". Use the shortest effective method to deal with it. The longer the delay, the greater the loss, so When you encounter problems such as water in the warehouse, you must act immediately.
