Industrial touch screens will have some failures during use, such as the phenomenon of insensitive touch and freeze. What are the reasons for this phenomenon? Let's take a look together, how can we better do a good job in industrial touch screen maintenance measures.
If the touch surface touch screen responds very slowly, it may be that the touch screen system is outdated, the internal clock frequency is too low, or there are water drops on the touch screen surface, if you want the touch screen to respond quickly, you must replace or upgrade the system, or wipe it with a rag Dry water droplets on the surface of the touch screen. Generally, this situation may be common for multi-touch screens, but it is good to pay attention to maintenance. In the detailed operation and use, we must also pay attention to the following supplementary 9 points that are not valued:
1. TP is a glass product, please handle with care to avoid breaking.
2. The touch surface of TP is made of conductive film. If the protective film is torn off, please absolutely prohibit pressing the surface of the product with nails, pencils, ballpoint pens or other sharp objects to avoid staining and scratching the product.
3. Please do not stick oil, water and other liquids on the surface of the product.
4. When there are stains on the surface of TP, please use absorbent cotton balls or a dust-free cloth lightly dipped in alcohol, gently wipe the surface of the product, and do not infiltrate the alcohol into the product.
5. Please avoid using and storing in the environment of organic solvent or corrosive gas (acid gas, etc.).
6. When installing, please choose non-corrosive glue to fix the product.
7. When installing the machine, please wear finger cots or gloves to take the product to ensure the cleanliness of the product.
8. When the TP is found to have no function, please check whether there is a false solder, whether the pins are in good contact, whether the installation is correct, and whether the touch position is accurate. If this problem does not exist, please paste the protective film back to the product surface to ensure the product Completely return to the manufacturer for analysis and processing.
9. After unpacking and sampling, please keep the original sealed package and store it tightly to prevent the product from being affected by high temperature and humidity, causing watermarks on the glass surface of the product.
The above content is the problem of slow response of industrial touch screens. Take the above protection measures to protect the touch screen as much as possible, delay its service life, and avoid the phenomenon of slow response.
